Makita MAKKIT12X Power Tool Kit 3-18v-5Ah Lithium Batteries 12pce

Makita MAKKIT12X Power Tool Kit

MAKKIT12X Makita Power Tool Kit is powered through 3 x 18v x 5Ah Lithium Batteries plus 18v Fast Charger packed into 4 x Makita Power Tool Boxes plus handy MakPac Stackable Trolley and tough industrial Wheeled Toolbag. This 18v BESPOKE Power Tools UK 12pce kit includes the DHP486 Combi Drill, DTD154 Impact Driver, DHS680 Circular Saw, DJV182 Jigsaw, DTM52 Multi Tool, DML815 LED Torch, DHR242 SDS-Plus Hammer Drill, DGA504 Angle Grinder, DBO180 Sander, DJR185 Reciprocating Saw, DKP180 Planer + Dust Bag and MR003G BLUETOOTH FM/DAB+ Radio

Makita DHP486 Combi Drill

DHP486 Makita Combi Drill 18v plus electric brake, x2 all metal mechanical gears and metal gear housing plus tough brushless motor. Other features of this DHP486 Makita Combi Drill include forward and reverse rotation, variable speed trigger control, bright LED work light, single sleeve keyless chuck and ergonomic handle

Technical Specification of 18v Makita DHP486 Combi Drill

• Tough brushless motor
• Variable speed trigger control
• x2 all metal mechanical gears plus metal gear housing
• No load speed high 0 to 2100rpm
• No load speed low 0 to 550rpm
• Blows per minute high 0 to 31500ipm
• Blows per minute low 0 to 8250ipm
• Maximum drilling through wood 76mm
• Maximum drilling through masonry 16mm
• Maximum drilling through steel 13mm
• Torque setting 21 + drill
• Maximum fastening torque (soft joint) 65nm
• Maximum fastening torque (hard joint) 130Nm
• Forward and reverse action
• Electric brake
• Single sleeve keyless chuck
• Chuck capacity
• 1.5mm to 13mm
• Easy bit installation and removal with one hand
• Bright LED work light
• Ergonomic handle
• Depth stop
• Side handle
• Weight 2kgs
  

Makita DTD154 Impact Driver

DTD154Z Makita Impact Driver comes with the very useful T-mode tightening mode for self drilling screws, electronic 3 stage impact power selection (hard, medium and soft) plus high powered brushless motor. This DTD154 Impact Driver has a one touch sliding chuck for easy bit installation and removal, an electric brake and bright LED work light, full variable speed trigger control and forward and reverse action

Technical Specification of 18v Makita DTD154 Impact Driver

• High powered brushless motor
• No load speeds 0 to 3600rpm, 0 to 2600rpm, 0 to 1100rpm
• Maximum fastening torque 175Nm
• Full variable speed trigger control
• Forward and reverse action
• Electric brake
• T-mode tightening mode
• Electronic 3 stage impact power selection (hard, medium, soft)
• Driving shank 1/4" hex
• Blows per minute 0 to 3800ipm, 0 to 2600ipm, 0 to 1100ipm
• Machine screws M4 to M8
• Standard bolts M5 to M16
• High tensile bolts M5 to M14
• Coarse thread lengths 22mm to 125mm
• One touch sliding chuck
• Easy bit removal and installation
• Ergonomic soft grip
• Compact overall length
• Weight 1.5kgs

Makita DHS680 Circular Saw

DHS680 Makita Circular Saw built round a powerful brushless DC motor and automatic torque drive that increases the torque of the motor depending on the loading while cutting. Features of this DHS680 Makita Circular Saw includes a magnesium base with 45 degree to 50 degree bevel cutting capacity, twin LED work lights with pre-glow and large lock off lever.

An LED indicator panel has 3 indicators for battery fuel gauge, auto torque drive and total overload protection, supplied with handy tool hanger for rafter or ladder storage. These 18v circular saws can be powered by genuine Makita 3Ah, 4Ah or 5Ah lithium batteries

Technical Specification of 18v Makita DHS680 Circular Saw

• Brushless DC motor
• 165mm TCT blade
• No load speed 5000rpm
• Automatic torque drive
• Magnesium base
• 45 degree and 50 degree bevels
• Maximum cutting capacity at 0 degrees 57mm
• Maximum cutting capacity at 45 degrees 41mm
• Maximum cutting capacity at 50 degrees 37mm
• LED indicator panel with 3 indicators
• Battery fuel gauge
• Automatic torque drive
• Overload protection
• Twin LED work lights
• Large lock off lever
• Rear dust exhaust port
• Overall length 350mm
• Tool hanger
• Weight 2.9kgs

Makita DJV182 Top Handle Jigsaw

DJV182 Makita Jigsaw popular top handle design comes with a tough 18v brushless motor and "soft no load" function automatically reducing the motor speed during idling suppressing vibration of the machine body. DJV182 Makita Jigsaw has a variable speed control dial, tool-less blade change, trigger switch has a lock-on button, improved dust extraction hose joint and blower function to clear wood dust from the cutting line. The rigid aluminium base bevels 0 to 45 degrees and change lever for 3 orbital settings and straight cutting plus soft start feature, DVJ182 Makita Jigsaw can be powered with 6Ah, 5Ah, 4Ah or 3Ah lithium batteries

Technical Specification of 18v Makita DJV182 Jigsaw

• Brushless motor technology
• Rigid aluminium base
• 0 to 45 degrees bevels
• Change lever for 3 orbital settings and straight cutting
• Tool less blade change
• Variable speed control dial
• Soft start feature
• Soft no load function
• Maximum in steel 10mm
• Maximum in wood 135mm
• Maximum in aluminium 20mm
• Strokes per minute 800spm to 3500spm
• Universal shank
• Stroke length 26mm
• Improved dust extraction hose joint
• Trigger switch with lock-on button
• Ergonomic soft grip
• Twin LED job lights
• Weight 2.6kgs

Makita DTM52 Multi Tool

DTM52 Makita Multi Tool easy grip small body with variable speed control and soft start feature, constant speed control and a bright LED work light. The DTM52 Makita Multi Tool is built round a tough high quality brushless motor with anti-vibration technology, tool-less accessory clamp, anti-restart function, x12 angle settings for accessories at every 30 degrees from 0 degrees to 360 degrees and is compatible with STARLOCK MAX accessories

Technical Specification of 18v Makita DTM52 Multi Tool

• Maximum output 370w
• Oscillations per minute 10000opm to 20000opm
• Oscillation angle 3.6 degrees
• STARLOCK MAX shank
• Variable speed control
• Soft start feature
• Contract speed control
• LED work light
• Anti-vibration technology
• Brushless motor
• Anti-restart function
• Easy to grip small diameter body
• Tool-less accessory clamp
• Compatible with STARLOCK MAX accessories
• x12 angle settings every 30 degrees from 0 degrees to 360 degrees
• Weight 1.7kgs

Specification of 18v Makita DML815 LED Torch

DML815 LED Makita Torch gives around 54 hours of illumination when used with the Makita BL860B Lithium Battery. The DML815 Makita Torch is a high luminance 4 x 0.5w LED flashlight providing the trade with 160 lumens plus 12 position pivoting head with positive stops from 0 degrees to 170 degrees great for illumination in tight difficult areas around the site. The compact, lightweight ergonomic design and soft grip increases and bright LED's provide a sharp, round spotlight

Technical Specification of 18v Makita DML815 LED Torch

• 4 x 0.5w LED's
• 160 lumens
• Sharp round spotlight
• Around 54hrs run-time from a 6Ah lithium battery
• 12 torch positions
• Positive stops from 0 degrees to 170 degrees
• Soft grip
• Metal strap hook
• Compact ergonomic design
• Size l x w x h 270mm x 80mm x 115mm
• Weight 0.5kgs

Makita DHR242 SDS-Plus Rotary Hammer Drill

DHR242 Makita SDS-Plus Rotary Hammer Drill built round a superb brushless DC motor that provides a higher level of productivity than previous Makita Hammer Drills. This high quality industrial 18v SDS-Plus Hammer Drill gives the trade 3 modes of operation rotation + hammering, hammering only and rotation only with a unique rubber joint construction suppresses the transmission of vibration minimizing battery failure such as terminal breakage or poor electrical contact.

Other features include one touch slide type chuck for SDS-Plus bits and easy grip handle giving the trade maximum power thrust with sure and comfortable grip in any operation. The DHR242 tool body is separated into the upper and lower housings at the foot of the handle portion where the houses are jointed with vibration absorbing cushion rubbers

Technical Specification of 18v Makita DHR242 SDS-Plus Rotary Hammer

• No load speed 0 to 950rpm
• Blows per minute 0 to 4700bpm
• Impact energy 2jls
• 3 mode operation
• Rotation + hammering
• Hammering only
• Rotation only
• Drilling capacity in steel 13mm
• Drilling capacity in wood 27mm
• Drilling capacity in concrete 24mm
• One touch slide chuck
• Brushless DC motor
• Dust extraction system
• Easy grip handle
• Unique rubber joint construction
• Weight 2.6kgs

Makita DGA504 Angle Grinder

DGA504 Angle Grinder giving the trade 125mm Disc Diameter and tough maintenance free brushless long life motor technology. Constant speed electronics, overload protection and AVT Anti-Vibration side handle allow safe working conditions with a lower fatigue level. The DGA504 Angle Grinder is fitted with Battery Protection System that automatically shuts off power when the battery level is low.

Technical Specification of Makita DGA504 Angle Grinder

• Tough brushless motor technology
• No load speed 8500rpm
• Disc diameter 125mm x 22.23mm bore
• Maximum disc thickness 6mm
• NVR switch (anti-restart function)
• Constant speed electronics
• Soft start feature
• On/off switch located on the machine for easy one handed operation
• Soft grip body
• Battery protection system (auto shutdown)
• AVT anti-vibration side grip
• Weight 2.1kgs

Makita DBO18Z Sander

DBO180 Makita Sander, this Makita Random Orbit Sander was the first cordless sander introduced to the Makita Power Tools range, simple to operate using the electronic push button switch with 3 speed settings. DBO180 Makita Random Orbit Sanders can use 5Ah, 3Ah, 6Ah or 4Ah Lithium Batteries and have a low centre of gravity and overall compact design allowing superb manoeuvrability and extended sanding per charge making the DBO180 an ideal alternative to being trapped by a cord

Technical Specification of 18v Makita DBO180 Orbit Sander

• 3 stage push button speed control
• Can accept 3Ah or 4Ah slide fit batteries
• Orbits per minute 7000/9500/11000opm
• Sanding stroke per minute 14000/19000/22000spm
• Orbit diameter 2.8mm
• Pad size 123mm
• Paper size 125mm
• Paper fastening hook and loop
• Connectable to dust extractor
• Weight 1.3kgs

Makita DJR185 Reciprocating Saw

DJR185 Makita Reciprocating Saw uses two switch levers for full variable speed control, the trigger on the tool handle plus a paddle switch on the tool body making easy, safe operation in any grip position, fully versatile reciprocating saws using either trigger. Other features of this DJR185 Makita Reciprocating Saw includes a single LED work light with handy pre-glow function, shoe adjustment and rubberised soft grip providing safe and sure grip around the tool. As these machines are DJR185 models they can be powered using genuine Makita 3Ah, 4Ah, 5Ah or 6Ah lithium batteries

Technical Specification of 18v Makita DJR185 Reciprocating Saw

• Strokes per minute 0 to 3000spm
• Stroke length 13mm
• Cutting capacity through wood 50mm
• Cutting capacity through mild steel pipe 50mm
• LED work light
• Shoe adjustment
• Trigger switch
• Paddle switch
• Rubberised soft grip
• Weight 1.8kgs

Makita DKP180 Planer

DKP180 Makita Planer don't purchase yet more batteries or charger add to your overall 18v power tool kit by purchasing this BODY ONLY 18v Planer full value for money Makita Power Tools. Makita DKP180 has a planing width of 82mm allowing this cordless 18v Makita Planer to remove stock and perform alongside traditional corded planers

Technical Specification of 18v Makita DKP180 Planer

• No load speed 14000rpm
• Planing width 82mm
• Planing depth 2mm
• Maximum rebate depth 9mm
• Weight 2.8kgs

Makita MR003GZ Jobsite Radio

MR003GZ Makita Jobsite Radio compatible with XGT, LXT and CXT batteries. This MR003GZ Makita Jobsite Radio is designed to receive DAB/DAB+ stations and has a bright easy to read digital tuner and LCD display plus illuminated control buttons and dial improve visibility. The main features include x2 stereo speakers, elastomer bumpers with metal pipes protect against rough handling, micro USB port for software upgrades plus carry handle with built-in FM antenna and AUX-IN adaptor jack

Technical Specification of 12v/18v/40v Makita MR00GZ Jobsite Radio

• Capable of receiving DAB/DAB+ and FM radio stations
• Frequency range DAB Band III 5A - 13F
• Frequency range FM 87.5 - 108Mhz 
• x2 stereo speakers 89mm
• Easy read digital tuner with LCD display
• Illuminated control buttons and dial improving visibility
• Elastomer bumpers and metal pipes protect against tough handling
• AUX-IN jack
• AC adaptor jack
• Carry handle with built-in antenna
• IP65 dust and shower proof construction
• Compatible with XGT, LXT and CXT batteries
• Battery range 12v to 40v
• Practical output 12v x 1.7w x 2
• Practical output 18v x 4.9w x 2
• Practical output 40v x 4.9w x 2
• Weight 4.2kgs